 |
Reg. 23
MATERIALS OF CONSTRUCTION
STEEL PLATES, RIVETS, SECTION AND BARS IN CARBON STEEL
Branding |
| (i) |
Every plate, section and bar shall be clearly
and distinctly marked by the maker in two places with
the number of identification mark by which they can be
traced to the charge from which the material was made.
As an alternative the rivet bars may be bundle and tabbed
to enable the material to be traced to the cast of steel
from which they are made. |
| (ii) |
Every plate shall also be stamped by the
steel maker as provided in IS: 2002. The following information
shall necessarily be provided:- |
| |
1.
|
Name of the manufacturer; |
| |
2.
|
Specification: |
| |
3.
|
Heat No.; |
| |
4.
|
Plate No.; and |
| |
5.
|
Stamp. |
|
|
